Some people believe that walking on a metal roof can be dangerous for themselves and their roofs.
This is wrong – most metal roofs are perfectly safe, and those that are not are in poor condition, decrepit, and can be easily identified.
Walking on the roof may be necessary to clean the roof, remove snow or leaves, and make minor repairs.
How to Walk on Metal Roofs
If you want to learn to walk on the metal roof safely without slipping and damaging the ceiling, then follow the proper procedures every time you venture into it.
But before that, let’s find out how the metal roof can be slippery?
The reasons for slippery metal roofs
It is difficult to describe. Because even when they are dry, they can be slippery. But other than this, when it rains or snow, the roof becomes excessive slippery.
Because the moist from snow or rain keep it wet for a long time.
Also, sometimes, there are moss or fungus grew on the roof, making it difficult to walk on.
How to walk on metal roofs without slipping?
Heres a procedure on how you can walk on metal roof without the risk of slipping:
- Avoid walking on the metal roof if it rains, snows, hail, or if the roof is ice or mossy. Metal ceilings can become quite slippery – and treacherous – in these conditions.
- Check with the manufacturer of the metal roof panels before going to the roof. The website for metal roofs notes that each piece of metal or metal panel manufacturer has detailed instructions on how to walk on a metal roof, based on the design of the shingles and the degree of tone of its roof. Obtaining this information before leaving means that you will be as safe as possible when on the roof.
- Establish a ladder and climb to the ceiling. Wear shoes with rubber sole.
- Step to the ceiling carefully. Look at the ceiling, looking for the seams of the ceiling panels. Walk carefully along the contours of your roof, avoiding seams. If you step on a metal roof seam, the seal may break.
- If there is any weak spot that you know beforehand, step away from that. Look for moss and other substances, avoid them too.
- Place the flat board on the ceiling to safely support in a roof seam without causing damage. We recommend walking on roof rafters, which are 16 to 24 inches apart.
- walk back to the stairs when you’re done on the roof. Lift yourself on the stairs and descend carefully.
Tips for walking on a steel roof
On a roof, and more specifically a metal cover, you must be careful where you put your feet: although it resists shocks and does not break under different stresses (moving people, hail, snow, etc.), the metal tile must be subject to some precautions when moving:
- Walk, preferably on the nose of the tile, the most rigid part of the profile.
- Follow the battens to prevent any deformation of the elements
- View the impact test video on the DECRA Classic profile, Polytuil.
- If one moves on its roof following the rules stated above, the metal tile does not fear to be deformed: it is very resistant!
- Always put a big step. Rubber-soled shoes are anti-corrosion types, so use a pair of those.
Warnings you should remember
- Avoid walking on metal roofs that are in poor condition, as they are not necessarily safe.
- Especially if you get on a roof, try to secure yourself with a good rope, passing it under your shoulders and fixing it, for example. To a sturdy chimney.
- Wear comfortable shoes, with anti-corrosion sole. Don’t even joke about going barefoot!
- If there is humidity or, worse, the possibility of finding ice, postpone the surgery to better moments.
- Beware of any insect nests (such as bees, but above all wasps or hornets): if you have the impression that there should be guests of this type in the place where you should work, it is better to have the pest control intervene! If, on the other hand, you notice one of these insects buzzing around you when you reach the antenna, don’t lose your temper and don’t make any sudden movements! Because then you have more chances of slipping in a hurry.
Nevertheless, the most considerable caution must be adopted if you have to climb on a roof: do not forget to equip yourself with adequate clothing, non-slip shoes, and a pair of gloves.
We always advise you to avoid these kinds of stunts and leave the works on professional.
But if you have to do, follow our guide on How to walk on metal roofs without slipping.
The rest depends on skill, carefulness, and luck! Wish you a safe walk!